SpeedoVap LV (Low Volume) Nitrogen Evaporator the most commonly used evaporator model, is an automated high speed, low volume sample concentrator. It is an efficient new alternative to conventional evaporation techniques. SpeedoVap LV Nitrogen Evaporator & Concentration System can evaporate up to 50 samples in a batch. .
SpeedoVap® HV is a High Volume Nitrogen Evaporator & Concentration System specially designed to evaporate large sample volumes. SpeedoVap HV can evaporate 8-15 samples in a batch. The system has the facility to use interchangeable racks for to accommodate any large volume test tube or beaker to meet requirements of different applications with evaporation volume of 50 mL to 200 mL.
Several laboratories require a particular volume of solvent retained at the end of evaporation that is reconstituted again before analysis. In those case the standard SpeedoVap High Volume Nitrogen Evaporator does not meet their demand. For such applications, we have the SpeedoVap HV Optical End point Nitrogen Evaporator that allows the user to evaporate a preset 0.5 mL, 1 mL or 2 mL end point process.
Solid phase extraction is a chromatographic technique used to prepare samples for subsequent analysis by removing interfering substances that may be present. This is done either by retaining the substance of interest and washing off everything else or by retaining the interfering substances and eluting the product of interest.
SPE is a form of chromatography, and, as with other chromatographic techniques, control of flow rate is critical for maintaining reproducible extractions. The Vacuum manifold used valves to control flow through each cartridge. The Vacuum manifold is available for 12 port and 24 port samples.
The Multi-Tube Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation. This vortex mixer gives a distinctly different motion than shaking a sample. With vortexing, greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility.
The Incubator Shaker combines shaking with a precisely controlled temperature environment in a single instrument. It is the standard platform for microbial culture growth, fermentation, enzyme kinetics, and biochemical assays that require both consistent agitation and a stable temperature throughout the run.
Customisable as per your application.
Takahe’s new addition to the sample preparation instruments is the Wrist Action Separatory funnel shaker. This shaker is efficient in shaking evenly reagents of various kinds of materials under same control parameters. It is suitable for organic, inorganic chemical, medical, and pharmaceutical research, extraction & development of media, and waste water analysis.
Generate Nitrogen when you need it from natural resource. Our atmosphere contains 78% nitrogen. With compressed air as the source, Nitrogen can be isolated using Pressure Swing Adsorption technology (PSA) up to the purity levels required.
